Bus Wraps Features
Bus
wraps, which is applied to many buses today, is a large vinyl design that
covers a part or the whole of a bus.
Bus Wraps
Bus wraps application is a type of coating
applied to buses as mobile billboards, usually to promote special products or
to increase brand awareness. However, buses covered by billboards or other
outdoor advertisements are easy to transport and offer access to more people at
a low cost. They may be placed on city buses, private buses, or tour buses. It
is one of the best and cheapest ways to advertise.
Bus Wraps History
The idea of using buses as advertising
dates back to about the early 20th century. While advertising posters were
generally displayed on public buses at that time, Milton Hershey, who painted
the famous "Hershey" logo on buses in the early 1900s, started the
idea of covering the entire vehicle with an advertisement and the idea was
held. The possibility of seeing advertisements with this bus wraps application for people who spend most of their day by
driving or for pedestrians on the road has come up to the present since ancient
times.
How to Make Bus Wraps?
All coatings nowadays start with a design
idea. A client works with a graphic designer who specializes in working with
skins to set their expectations and discuss ideas and brand guidelines. When
the 2D design plan is implemented, the graphic designer must give various
shapes to all kinds of curves and grooves of the bus and transform it into
advertising. After the customer confirms the designer's proof, the designer
consults with the manufacturer to split the design into panels to be applied to
the bus in one go.
Ideally, these panels will create a perfect
picture on the vehicle. Once the design is printed, the bus must be prepared
before the vinyl coating is applied. The buses to be used are sent to a wash
and cleaned with isopropyl alcohol before moving to a climate controlled
environment for installation. Dust, dirt, grease and temperature changes can
all prevent the vinyl from being applied properly. Installation usually takes
two days. After the vinyl coating is installed, the vehicle must be left for
one day to cure. When the process is completed, the vehicle is ready to go.
Yorumlar
Yorum Gönder